Blog

Repairing a Noisy Water Heater

Posted by on Mar 17, 2015 in Gas Water Heater Repair Daly City CA, Water Heater Repair Daly City | 0 comments

Water Heater Repair Daly City is often being consulted to check out at water heater. Popping and knocking noises can be as a result of problems with the water heater, but it’s likewise an aggravation. We are going to detail the most typical reason your water heater may possibly begin producing noise and what you can possibly do to calm it down! Prior to consulting a Daly professional, have a look at one of the most frequent water heater difficulties and remedies.

The most likely reason a water heater will make noise

Again, if the sound is an indicator of problems with the heater that trouble is probably sediment build up. The sediment stems from the water in the storage tank. It is largely comprised of calcium and magnesium debris and is particularly a difficulty in residences which may have hard water.

If the sediment starts to accumulate at the bottom of the storage tank, it traps a little part of hot water beneath it. This triggers the hot water to boil as the tank works. The sounds noticed are the bubbles popping through the sediment.

Furthermore, the sediment itself may well be the source of the sounds. The sediment sits at the bottom of the tank and can get burnt up resulting in irregular sounds. And on occasion, the sediment will get carried up to the top of the tank and breaks off resulting in sounds as it plunges back down, bumping the sides on its way.

How to avoid a water heater from producing noise

If sediment build-up is what’s resulting in the sounds, the heater should be examined. Water Heater Repair Daly can accomplish this and provide the tank a flush or advise a different remedy.

You can also avoid sediment build-up by having expert routine maintenance conducted on the storage tank a minimum of annually. This procedure involves flushing the tank of any sediment.

An additional good possibility is to add a water softener in your Daly house. Water softeners get rid of minerals from the water prior to it entering the water heater, dramatically decreasing sediment build up.

For additional information about other probable problems and remedies provide Hot Water Heater Repair Daly City a phone call!

Reasons Why a Hot Water Tank Will Explode

Posted by on Jan 22, 2015 in Gas Water Heater Repair Daly City CA, Water Heater Repair Daly City, Water Heater Safety | 0 comments

With regards to needing to perform servicing on ones water heater, it is a rather minimal maintenance home appliance.  Nevertheless, one significant aspect of it must be checked out routinely.  Water Heater Repair Daly City would like to pass on this safety material regarding ones water heater today.Water Heater Repair Daly City

Abnormal temperature if merged with tank deterioration inside the storage tank can result in an explosion. If the water temperature is less than 212 degrees Fahrenheit, one is going to be secure from an explosion, though there is a real danger of scalding at that temperature.  However, if the water temperature is greater than 212 degrees, water becomes into steam, which will enlarge to 1,700 times the space it takes up as water. This is the time an explosion can also occur.

Cautionary Indications of a Water Heater Explosion

The leading sign is if one goes to get hot water from a faucet and only steam comes out.  Promptly shut off electric power if one owns an electric water heater.  If one owns a gas hot water heater, shut off the gas valve on the water heater.  And then, give us a call to come check out the problem.

Minimizing Potential Water Heater Dangers

The most essential upkeep activity having a water heater is to check the pressure relief valve, often known as the T&P valve, on a standard schedule.   This valve helps manage the pressure accumulation inside of the water storage tank to avert a threatening increase in temperature and overpressure.

Caution!
Remember, the water release out of a T&P valve may be quite hot. If you do not feel at ease examining the valve inform us.  Additionally, executing any sort of fixes to the valve really should be executed by a qualified plumbing repair business.

How to Test the T&P Valve

Clear the place close to the overflow pipe and floor drain.
Raise the test handle for around 5 seconds or until the water runs clean.
Let go of the handle.
If the T&P valve keeps on running with water, lift up the handle up and down rapidly to have it reseat itself.  One might have to do this a several times.  IF it has not been tested for a while, it might be difficult to raise it at first.  Avoid using excessive force, however might need to utilize just a little.
If the T&P valve continues to leak, it needs to be changed.

Some other items to watch out for are deterioration on the stem of the valve.  If there is any water dripping out of the valve stem or out of the drain valve.

Seeking far more strategies?  Have a look at Water Heater Repair Daly City’s additional articles right here:

Changes to Water Heater Regulations 2015

Daly Water Heating Savings Advice

From around the Web:

The Aquanta smart water-heater controller promises to slash your energy bill

Home maintenance checklist: Fall

Changes to Water Heater Regulations 2015

Posted by on Dec 19, 2014 in Water Heater Repair Daly City, Water Heater Replacement Daly City | 0 comments

There are adjustments that will be taking place in April 2015 from the federal government on water heater rules.  The new requirements deal with the efficiency of all newly made water heaters.

What Will New Water Heater Standards Mean to Daly Homeowners?Hot Water Heater Repair Daly City

First of all the higher efficiency requirements will be a good factor obviously.  Nevertheless, it will likewise increase the price of new water heaters.  The price increase will be due to the extra cost of producing the water heaters with more insulation in them.  A side effect of doing so, will increase the dimensions of the water heaters.  So if a property owner is upgrading the existing one, the new gas water heater storage tank will most likely occupy more room, which could possibly be an challenge if the current area the storage tank is in is a close fit.

An additional modification is for 55 gallon water heaters or larger will need to switch to a PVC flue, for metal pipes won’t be permitted any longer. This will lead to an additional cost it the flue pipes have to be replaced when putting in a new water heater.

Water Heater Repair Daly City is not indicating that one has to go out before April 2015 and invest in a new water heater, but if ones existing water heater is more than ten years of age, it is getting near to the end of its life cycle. One can simply wait, however in so doing, the newly produced water heater will need to satisfy the new, more expensive specifications.  One is able to acquire currently available water heaters prior to the deadline day, and may consider to do this.

Reported by www.wtae.com …. an “older-model 40-gallon tank is estimated to cost homeowners $277 a year to operate. The new models are estimated to cost $263.”

This is what the Department of Energy has to state:
“Standards mandatory in 2015 will save approximately 3.3 quads of energy and result in approximately $63 billion in energy bill savings for products shipped from 2015-2044. The standard will avoid about 172.5 million metric tons of carbon dioxide emissions, equivalent to the annual greenhouse gas emissions of about 33.8 million automobiles.”

The following video by Rheem clarifies the new rules effectively:

Do not be reluctant to speak to us with any thoughts on a new water heater installation or replacement.  Hot Water Heater Repair Daly City is always here for you!

Leaking Daly Water Heater Pressure Relief Valve

Posted by on Dec 9, 2014 in Gas Water Heater Repair Daly City CA, Water Heater Repair Daly City | 0 comments

The pressure relief valve of a water heater has an important task – making sure the water heater tank does not blow up. So with that in mind, Water Heater Repair Daly City wishes to ensure property owners understand ways to best care for it. They will certainly leak when the valve breaks or when the water storage tank pressure gets greater then the relief point.Hot Water Heater Repair Daly City

We advise that at least twice a year, homeowners test to ensure the pressure relief valve, or T&P valve as we will call it, is working appropriately. All one has to do is raise the deal with for a few seconds and let go of it. It ought to snap back to its initial position. When it is raised, one may hear the sound of pressure being released , much like the noise of air coming out of a tire pump when being detached. Likewise, a little water may come out also. Both are typical. If the valve has not been tested for a number of years, it may stick at first too.

However, if the handle does not snap back, or if it remains to leak a little water, that is not typical. If it still leaks some, raise the handle a few more times to see if it does re-seat itself. You may want to wait a day or so it see if it re-seats itself before assuming it has to be replaced.

Hot Water Heater Repair Daly City would prefer to handle any T&P valve replacements for you, so though hot water heaters are typically fairly upkeep free, there are some safety preventative measures one need to bear in mind. With that in mind here is a summary of a pressure relief valve replacement.

1. The gas to the water heater has to be shut off, or the breaker for an electric water heater.
2. The cold water cut-off valve needs to be closed next.
3. The valve below the T&P valve has to be opened to drain a little water in order to relieve some of the pressure in the storage tank.
4. The overflow pipe of the T&P valve has to be taken off. It might need to be cut off if it is soldered or securely glued.
5. The pressure relief valve needs to be unscrewed with a pipe wrench.
6. Wrap the brand-new T&P valve with Teflon tape and screw it in place. Make certain the overflow pipe opening is placed away from the storage tank.
7. Reattach the drain pipe, also utilizing new Teflon tape.
8. Turn the water back on, and examine your work for any leakages.

The following video provides a summary of this procedure:


Daly Water Heating Savings Advice

Posted by on Nov 7, 2014 in Water Heater Repair Daly City, Water Heating Savings | 0 comments

Faucet aerators and low flow shower heads are a great way to save water, and water conservation implies house energy savings for you.

Bathroom and kitchen faucet aerators are easy to add to ones faucets. The wire screens just screw in and will mix air into the water flow, think of it as rationing the water running out of the faucet.Water Heater Repair Daly CIty

When first introduced the preliminary purpose was to just minimize the flow rate or water stream in order to remove sink spilling.

However, with the rising interest in water preservation, property owners and companies that are looking to save on energy usage, are becoming more thoughtful about the water saving capacity of faucet aerators.

In terms of ones Daly water heater, aerators do not just conserve water, they also help in reducing the gas and electrical power cost involved with water heating. Aerators paired with water conserving shower heads can minimize the average houses hot water use by as much as 50 %.

Both water saving gadgets are unbelievably economical and really easy for homeowners to install.

Low flow aerators can be put on almost any conventional faucet. Examine the tips of ones faucets to see if there are threads along the inside. Even numerous older bathroom and kitchen sink faucets are pre-threaded.

If one already has older aerators attached, they can be taken off by hand or with a wrench. The flow rate (which is measured in gallons per minute or gpm) ought to be imprinted along the side. Newer faucet aerators can significantly lowered flow rates even further than older models and all without minimizing the water pressure.

Kitchen Aerators

Kitchen faucets usually require greater flow rates than a restroom faucet. Because of this, aerators with minimum flow rate of 1.5 gpm is extremely suggested for conserving water. Nevertheless kitchen faucets without aerators can make use of as much as 3 to 5 gallons of water per minute.

A new model of aerators have swivel pivots that permit a round or turning motion which comes in convenient when cleaning ones kitchen sink. Those who clean dishes by hand might discover a swivel aerator with a shut off valve much more helpful.

Bathroom Aerators

Bathroom aerators usually are chrome plated or brass. They provide a more direct and pressurized spray than a lot of kitchen sink aerators. And bathroom aerators generally cost even less, varying anywhere from $2 to $5 each.

Bathroom faucets without these accessories can use anywhere from 2 to 4 gallons of water per minute. New low flow restroom aerators utilize as low as 1 to.5 gallons per minute and all without lowering water pressure.

Always Remember to Keep Aerators Clean

The wire screens can get obstructed with sediments and other mineral deposits after months or years of continuous use. Periodically remove for a cleaning. This will resolve possible water pressure troubles in addition to avoid future faucet leakages.

Low Flow Shower Heads

Installing low flow shower heads is really among the most cost effective things any property owner can do to save water. 30 % to 40 % of American houses today have conventional restroom shower heads installed which use as much as 5 to 7 gallons of water per minute.

The low flow shower heads currently on the market are not the old flow restricting designs of the past. A brand-new water saving shower head can substantially decrease ones water use and enhance water pressure at the same time.

Now water saver shower heads use air chambers or jet streams to swiftly mix air into the water flow. The streams and chambers enable the shower heads to use considerably less water, and also increase water pressure for that unwinding massage feeling.

More recently some models have successfully decreased water flow rates even lower than the federal standards. Some low flow designs use as low as 1 gallon of water per minute.

Some of the best shower heads enable one to pause warm water while in the shower. These shower heads are extremely hassle-free and they can help one save even more by using less warm and warm water while bathing.

This offers ones hot water heater a much deserved break, which in return translates into lower water heating expense.

Check out Water Heater Repair Daly City’s other tips in our blog here too!

Daly City Water Heater Installation Costs

Posted by on Nov 6, 2014 in Water Heater Replacement Daly City | 0 comments

The average life-span of a conventional tank-style gas water heater or electric water heater is about eight to twelve years, so the prospect of having to replace a water heater is an usual home improvement. Water Heater Repair Daly has discussed some of the factors that affect the setup costs here.

The costs to set up a brand-new Daly City hot water heater do vary in rate depending on the business carrying out the installation, and depending upon the kind of unit installed. For instance, energy-efficient tankless water heaters do cost more to install, though those costs can be regained over the life of the unit. Take a look at this tool from homewyse.com that will give an estimate on water heater setup costs for the part of the country one resides in.

Water Heater Installation Cost Factors

Without seeing the location that ones water heater will be installed or replaced, it is challenging to offer a particular idea of the cost. If it is a water heater replacement, and is being replaced with a comparable sized and design of heater, the setup costs will be really affordable. If one is updating to a different type of water heater, like from an electric to a gas or tankless unit, the installation costs will certainly be greater since we will have to possibly install gas lines and connections.

Another consideration is to see to it a replacement water heater will be up to code with what is needed now, not with what the code was 10 to twelve years earlier when the current water heater was set up. Also, there is the potential that the present water heater was not up to code when it was initially set up either! Which can be the case if a previous homeowner did the installation him or herself.

Because of the safety aspects involved with water heating systems, it is definitely best to have a professional plumbing company perform the setup. One, a lot of house owners will not have an idea of what the code requirements are. One threat aspect is that electric water heaters use 240 volts of electrical power, which is extremely unsafe to work with if not experienced in doing so. Water Heater Repair Daly City spends a lot of time repairing incorrectly installed water heaters.

Another safety concern with not having an expert set up ones water heater is dealing with natural gas lines. This, too, can be dangerous, and a scenario where there can not be any leaks.

A final safety concern is with effectively venting the exhaust to ensure carbon monoxide gas leaves the house. Carbon monoxide gas poisoning occurs more often than many people think, and it is best to ensure one has a carbon monoxide detector in ones home too. According to the Centers for Disease Control, unintended carbon monoxide poisoning triggers 400 deaths each year and 20,000 visits to the emergency room.

Other considerations with setting up is making sure it is plumbed correctly, there is enough clearance and guaranteeing drip pans are equipped, if required.

Holiday Daly Plumbing Advice

Posted by on Oct 29, 2014 in Water Heater Repair Daly City | 0 comments

The holidays are one of the busiest times of the year for us, specifically with drain cleaning, toilet repairs and other plumbing repair services. with the increased amount of guests and family in ones house, it can take a toll on the plumbing system.

Daly hot water heaters are working overtime with the included number of showers begin taken, clothes being washed, and dishes being cleaned or gone through the dishwasher. We recommend waiting a few minutes between showers if several are to be taken right after each other. The same goes with choosing times to run the dishwasher and washing machine too.

Drains especially have it hard, for we are performing Daly drain cleaning a lot more often, with the increased quantity of people making use of ones plumbing. It is likewise an intriguing time to see the number of toys and things that kids mistakenly attempt flushing down the toilet too!

Below is an infographic that will certainly provide some ideas on the best ways to handle ones water heating and plumbing this holiday.

Water Heater Repair Daly City